Edge Lifting Clutches
Description
Queensland Rigging Hire offer range of edge lifting clutches for hire and rental. Manufactured by Reid™ and Ancon ™, the lifting clutches range in capacity from 2.5 to 10 tonnes and are designed to align themselves to the pull of the rigging. Once the hardware is engaged and under load, the edge lifting clutch cannot be disengaged. Release of the edge lifting clutch from ground level is easily achieved after the load has been relaxed. Our clutches are supplied with test certificates and maintained to manufacturer standards.
REID | 3t | 5t/7t | 8.5t 3 3DX | 10t |
Pin Dia | 13mm | 16mm | 17mm | 20mm |
Jaw width | 13mm | 20mm | 20mm | 20mm |
Colour | Green | Orange | Zinc | Blue |
ANCON | 4.8t | 7t | 10t | |
Pin Dia | ||||
Jaw width | ||||
Colour | Green | Purple | Purple |
Note: The information on this page is indicative only. Please consult our team before undertaking any operations with this device.